Small Quantitative Filling Machine Operation Guide and Daily Troubleshooting - Bestam Filling Machine User Guide
Release time:
2024-11-21 09:12
Source:
Recently, the production team of Bestam Filling Machine has launched the latest operating and daily maintenance guidelines for production enterprises, aimed at helping users better master the usage and maintenance skills of small quantitative filling machines. In the current automated production line, the filling machine is a key component, and its efficient and accurate operation is crucial for product quality and production efficiency. Today, we will provide a detailed introduction to the usage methods and daily maintenance knowledge of this equipment.
1. Operating Guidelines:
Startup Steps:
1. Check the power connection to ensure the equipment is properly connected to the power supply and powered on.
2. Turn on the device switch to start the filling machine.
3. Adjust the filling speed, filling capacity, and other parameters according to the product characteristics.
Shutdown Steps:
1. After completing the filling task, turn off the device switch.
2. Disconnect the power supply.
2. Daily Maintenance:
Daily Cleaning:
1. After each operation, clean the equipment to remove any residual materials and stains.
2. Clean key parts such as the conveyor belt and filling nozzle to ensure no residues are left.
3. Keep the equipment appearance tidy and regularly clean the surface dust.
Maintenance Requirements:
1. Regularly check the electrical wiring, sensors, and other components of the equipment to ensure they are functioning properly. If any abnormalities are found, they should be replaced or repaired promptly.
2. Check the wear of moving parts such as the conveyor belt and bearings; if there is wear, they should be replaced in a timely manner.
3. Regularly lubricate the equipment to ensure normal operation.
Troubleshooting:
1. Fault Phenomenon: The equipment cannot start. Possible Cause: Power is not connected or switch failure. Solution: Check the power connection and ensure the switch is in working condition.
2. Fault Phenomenon: Inaccurate filling capacity. Possible Cause: Improper parameter settings or measuring instrument failure. Solution: Adjust parameters, check measuring instruments, and replace or repair them promptly if faulty.
3. Fault Phenomenon: Abnormal noise during equipment operation. Possible Cause: Component wear or insufficient lubrication. Solution: Check the wear of moving parts and enhance the lubrication maintenance of the equipment.
Usage Precautions:
1. Operators should be familiar with the equipment's user manual, understanding its performance, characteristics, and operating methods.
2. During use, it is strictly prohibited to disassemble equipment components without authorization to avoid damaging the equipment structure.
3. If there are any issues, please contact the Bestam Filling Machine production team in a timely manner, and we will provide you with professional technical support and services.
The small quantitative filling machine is an indispensable key equipment on modern production lines. Mastering the correct operating methods and daily maintenance knowledge is of great significance for ensuring the normal operation of the production line. The operating and daily maintenance guidelines launched by the Bestam Filling Machine production team aim to help users better use and maintain the equipment, improving production efficiency. We hope that users can follow the guidelines for operation and maintenance, ensuring the normal operation of the equipment and providing strong support for stable production on the production line.
Press recommend
Why is everyone promoting production equipment for standard card-type test cards, yet rarely mentioning equipment designed for pen-type test cards? That’s because pen-type test card production machines demand significantly higher technical expertise. Standard card-type equipment uses a simple, flat fixture arranged in a single line, while pen-type cards feature highly varied curved surfaces with dramatic differences in curvature—requiring precise alignment that must be achieved instantly to prevent gaps from forming. Moreover, the feeding process for pen-type cards is prone to misalignment, often leading to material stacking or even machine jams. And here’s another challenge: traditional 2D vision systems rely solely on "flat templates," so when they encounter the reflective surfaces or gradually changing patterns of pen-type test cards, they quickly "lose sight" altogether, resulting in a defect detection rate that starts at 2% or higher.
Jointly exhibiting at MEDICA 2025 in Germany—shining brightly on the international stage
On November 17, the world's most prestigious international medical event—the MEDICA 2025 International Medical & Healthcare Exhibition in Düsseldorf, Germany—began with a dazzling opening along the picturesque banks of the Rhine River.
Exhibition Preview | Bestar sincerely invites you to attend the MEDICA trade fair in Germany!
From November 17 to 20, 2025, MEDICA, the global benchmark for the medical industry, will make a grand debut in Düsseldorf. As a national-level high-tech enterprise specializing in precision manufacturing of biomedical machinery for 17 years, Huizhou Bestar Precision Machinery Co., Ltd. will showcase its cutting-edge in-vitro diagnostic technology solutions for the first time—stepping onto the international stage as a service provider (Hall 3, Stand H14)—and proudly present China’s “Made-in-China” innovation achievements, backed by 17 years of meticulous craftsmanship.
Precision is power: Precision Filling Equipment with Three-Way Valves
Traditional filling equipment has always faced three major challenges when handling high-viscosity and corrosive fluids: wall-adhesion losses erode product profits, fluctuating precision lowers yield rates, and cross-contamination poses significant quality-control risks. However, the three-way valve automatic filling system—centered around its advanced layered dynamic filling technology—redefines the standards for complex fluid handling. It’s as if equipping both laboratories and production lines with a "fluid GPS," ensuring that every drop of colloid, lysate, or biological reagent is delivered precisely to its intended destination, making layered filling a process that’s "zero stress" from start to finish!
Addressing industry pain points: The four major challenges in EP tube backend packaging—manual counting errors and omissions, blind spots in pneumatic sampling inspections, missed detection of visual defects, and downtime caused by switching between multiple specifications—have been tackled head-on by Bestar’s automated microcentrifuge tube packaging machine, which delivers four core solutions to ensure that every bag of centrifuge tubes achieves near-perfect results: "zero errors, zero missed defects, and zero human-induced inaccuracies."
The multi-variety, small-batch production model is causing Chinese IVD companies to suffer from chronic "blood loss"—leading to increased costs and reduced efficiency (such as expanded factory space, higher energy consumption in environmental control systems), a larger workforce, rising product defect rates due to inadequate cleaning practices, and extended equipment-changeover times. Against this backdrop, production and assembly equipment capable of seamlessly handling card-type or pen-type reagent cards of varying scales could be the key to breaking through these challenges! Bestar’s independently developed dual-channel assembly and packaging line for card-type or pen-type reagent cards represents a groundbreaking technological innovation that overcomes industry-specific technical barriers, delivering highly efficient, precise, and fully controllable testing solutions tailored for the life sciences sector!
Building B1, Xinghe Artificial Intelligence Industrial Park, 333 Zhong Kai 6th Road, Chen Jiang Street, Zhong Kai High-tech Zone, Huizhou City, Guangdong Province
Manager Liu +86 13751024612
Manager Wang +86 13680895250
+86-752-3880396
©Huizhoucity Bestam Precision Machine Co., Ltd. COPYRIGHT 2024
